Top Grade Ptfe Coated Ring Joint Gasket - Virgin PTFE Molded Sheet Teflon Sheet – Lucky Star Seal Detail:
INTRODUCTION:
Skived PTFE Sheet is manufactured by technique of compacting, sintering, rotary cutting with PTFE granular resin. It has good dielectric performance and non-aging, best anti chemistry corresion ability and wide applying intension range.
The thickness is 0.5 – 8mm.
ADVANTAGE:
1. Working termp -180 – +260℃
2. Excellent non-sticky property, it is easier to remove any foreign articles
3. Low friction coefficient
4. Anti-chemical corrosion property
5. Excellent electrical insulation
APPLICATION:
1. Cable wrapping under high voltage and high temperature
2. Sealing the electronic parts
3. Reaction kettle, storage tank, valve, container, liner and gasket
4. Corrosion-resistance liner, seal, dielectric materials etc
PROPERTIES:
PROPERTIES |
UNIT | VALUE |
Density | g/cm³ | 2.1 – 2.3 |
Color | White | |
Tensile Strength (min) | MPa | 15 |
Crack Elongation (min) | % | 150 |
Working Temp | ℃ | -180 – +260 |
Melting Temp | ℃ | 327 |
Produce Max Temp | ℃ | 385 |
Dielectric Strength(min) | Kv/mm | 10 |
SPECIFICATION:
Thickness (mm) | Width (mm) | Length (mm) |
0.5 – 8 | 850, 1000, 1200, 1500, 1800, 2000 | ≥500 |
Remarks:
—Other sizes, colors can be customized.
—Length, width and thickness tolerances may vary by manufacturer
PACKAGE: Wooden Case or Pallet
DELIVERY TIME & SAMPLES:
Delivery time: As your request,usually within 1 week
Free sample is available if you need.
Product detail pictures:

Related Product Guide:
Tips On Fitting A PTFE Ring Gasket In The Flange Joints
PTFE Ring Gaskets – A Reliable Solution For The Engaging Industries
carry on to further improve, to guarantee merchandise high-quality in line with market and buyer standard necessities. Our organization has a top quality assurance procedure have already been established for Top Grade Ptfe Coated Ring Joint Gasket - Virgin PTFE Molded Sheet Teflon Sheet – Lucky Star Seal, The product will supply to all over the world, such as: Poland , Slovakia , Ghana , We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.

The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
