Factory Cheap Hot Ptfe Gland Packing - 100% virgin PTFE Extrued Rod – Lucky Star Seal Detail:
Technical Data：
| Properties | Unit | Result |
| Apparent density | g/cm3 | 2.3±0.1 |
| Tensile strength (min) | Mpa | ≥25 |
| Ultimate elongation (min) | % | ≥200 |
| Working Temp | °C | -180 ~ 260 |
| Produce Max. Temp | °C | 385 |
| Melting point | °C | 327 |
| Hardness Rockwell | - | M65 |
Supply size：
|
Type |
Diameter (mm) |
Length (mm) |
|
Extruded rod |
4–100 |
As customized |
|
110–200 |
As customized |
|
|
Moulded rod |
50–300 |
300 max |
Advantages:
♦ Superior endurance in corrosion
♦ Non-flammable,limited oxygen index is under 90.
♦ Low friction coefficient
♦ Non-viscous, Self-lubricating
♦ Superior endurance in high & low temperature, can be used -200~260℃
♦ High electrical insulation
♦ Atmospheric aging resistance
♦ Low permeability, good gas barrier property
♦ Good physiological compatibility and anti-thrombotic
Applications:
♦ Corrosion resistance: widely used in all chemical containers and parts which contacted with corrosive media, such as tanks, reactors, equipment lining, valves, pumps, fittings, filter materials, separation materials and pipe for corrosive fluids.
♦ Abrasion resistance: can be used as a self lubricating bearing, piston rings, seal rings, gaskets, valve seats, sliders and rails etc..
♦ Insulation materials: mainly used in the manufacture of various products with high temperature resistance, high-frequency resistance, electrical insulation and arc resistance, such as high-frequency cables, moisture-resistant cables, capacitor coils, insulating cover for wire, etc..
♦ Medical materials: such as artificial blood vessels, heart, esophagus, peritoneum, heart devices, a variety of intubation tubes and catheters.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
All You Need To Know About The PTFE Ring Gasket
Our firm aims to operating faithfully, serving to all of our consumers , and working in new technology and new machine continually for Factory Cheap Hot Ptfe Gland Packing - 100% virgin PTFE Extrued Rod – Lucky Star Seal, The product will supply to all over the world, such as: Brunei , America , Canada , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Marjorie
from Cologne
- 2018.10.09 19:07
The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
By Gustave
from Swedish
- 2018.06.05 13:10
