2018 Latest Design Mechanical Seals Ptfe Teflon Gasket - Expanded Pure PTFE Strip – Lucky Star Seal Detail:
Description:
1.Expanded PTFE joint sealant tape is a multi-purpose gasket tape manufactured from 100% expanded PTFE fluorocarbon material.
2.It supplied as a continuous low density tape with a self-adhesive backing strip.
3.It is soft and spongy, permitting it to conform easily to all surface irregularities and to compress to a thin ribbon under pressure.
Application:
Expanded PTFE joint sealant tape is recommended as a gasket tape in steel, glass-lined, PVC and fiberglass pipe flanges, fume ducts, concrete lids, heat exchangers, fiber glass reinforced plastic vessels, pump housing flanges, steam vessel flanges, manhole and manhole covers, ceramic joints, ventilation ducts, hydraulic and pneumatic systems, water supply systems and turbine cases.
Resistance:
Expanded PTFE joint tape is manufactured from 100% PTFE, it is an inert material which can be used in many applications against corrosive environments, except molten alkali metals and elemental fluorine. 24B will not contaminate media and can be used in food and drug equipment applications.
Details:
Product Type: Expanded PTFE
Supply Type :Joint Sealant Tape
Material :100% PTFE, soft and excellent elasticity
Refractoriness :-260~ + 260 °C(-500/+500°F)
Thickness :1mm~7.0mm
Width :3mm~25m
ph range :0-14
Pressure Limit :20Mpa (or 2900 psi; or 200kgf/cm2)
Density :0.7~0.8g./cm3 (43~49.5lbs./cu. ft.3)
Elongation:20%
Matrix Tensile Strength :30Mpa (4260 psi)
Creep Relaxation (ASTM F38) :51%
Sealablity (ASTM F 37A) :0.1 ml/hr
Product detail pictures:
Related Product Guide:
All You Need To Know About The PTFE Ring Gasket
Tips On Fitting A PTFE Ring Gasket In The Flange Joints
The customer satisfaction is our primary target. We uphold a consistent level of professionalism, quality, credibility and service for 2018 Latest Design Mechanical Seals Ptfe Teflon Gasket - Expanded Pure PTFE Strip – Lucky Star Seal, The product will supply to all over the world, such as: Czech republic , Canada , Canberra , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Dana
from France
- 2017.10.25 15:53
A good manufacturers, we have cooperated twice, good quality and good service attitude.
By Monica
from Lithuania
- 2017.04.08 14:55
